Description
https://raceshocks.uk/wp-content/uploads/2023/11/TracTive-Logo-600-e1700067755415.jpg
LAND ROVER – Defender – 90-110-130 – Semi Active
1983 – 2012
TracTive Stand-alone electronically-adjustable shocks have been developed to implement high-tech semi-active suspension in any car. The dampers are fitted with the TracTive patented DDA (Dynamic Damping Adjustment) valve. With its reaction time of 6 to 10 milliseconds from full soft to full hard, it is one of the fastest damping adjustments in the market. It demonstrates a tremendous stability and reproducibility, and is rapidly becoming THE technology chosen by high-end OE and racing teams. For every application the damping level and damping adjustment range is set-up from factory. It is possible to tune the damping level if required. The display allows you to tune the suspension to almost any application by controlling roll, pitch and dive motions of the vehicle. The motion of the vehicle is monitored by a g-sensor integrated in the control unit, which is installed close to the center of gravity of the vehicle. The calibration is set up in the factory and can be updated if required. The stand-alone control system comes with a touch screen display that allows the driver to make on-the-fly adjustments, save settings and even make driver-specific setups. The driver is able to adjust the damping of the front and rear axle in 5 levels, but also the suspension resistance to roll, and pitch/dive in 5 levels. The display can be centrally mounted for easy access. The kit includes a remote knob that can be centrally mounted for easy access. This electronic suspension kit is valved specifically for Road and Track use, with a focus on sufficient comfort for optimal Road use while maintaining sport performance. Each kit is engineered for optimal performance and durability. The dampers are fitted with springs and have an infinite ride height adjustment either through the platforms on the shock bodies or through the separate adjusters. These kits are made specifically for OE top mounts, which means that the set contains either formed springs or adaptors to suit the stock parts. TracTive does not supply this kit with top mounts, we recommend replacing stock units when changing to new shockabsorbers.
46mm Pin to Pin shock – OE springs must be re-used – OE shock mounts to be re-used – OE top mount to be re-used – Rubber shock boots included
46mm Eye to Pin shock – OE springs must be re-used – OE shock mounts to be re-used – Rubber shock boots included
Compatible with OE springs – Requires TracTive Controller, wiring harness and touchscreen display
